贵州源妙自动化设备有限公司
品牌 |
BENTLY |
型号 |
3500/22M |
结构形式 |
模块式 |
安装方式 |
控制室安装 |
LD指令处理器 |
硬PLC |
工作电压 |
120VacV |
特点 |
安全性高 |
物料编码 |
810086230 |
系统环境 |
常温 |
系统能力 |
安全监测 |
操作系统 |
3500安全监测系统 |
系统功能 |
强大 |
质保 |
一年 |
工作频率 |
50/60 |
销售范围 |
国内,国外 |
用途 |
数控机械、冶金、石油天然气等等 |
功能说明:
3500/22m 是由 bently nevada 制造和设计的瞬态数据接口模块,属于用于监测地震活动的 3500 系列的一部分。3500/22m 瞬态数据接口 () 是 3500 监控系统和兼容软件(系统 1 状态监控和诊断软件以及 3500 系统配置软件)之间的接口。 将 3500/20 机架接口模块 (rim) 的功能与 tdxnet 等通信处理器的数据收集功能相结合。
特征:
在 3500 机架中, 位于电源旁边的插槽中。为了持续收集稳态和瞬态动态(波形)数据并通过以太网链路将该数据传输到主机软件,它与 m 系列监视器(3500/40m、3500/42m 等)进行交互。
具有传统的静态数据收集功能。然而, 还可以使用可选的通道启用盘来记录动态、高分辨率瞬态数据。
3500 机架包含 的通信处理功能。尽管执行一些由整个机架共享的任务,但它并不是监控系统的关键组成部分,并且与整个系统监控自主机械保护的效果无关。
3500 监测系统和兼容软件之间的链接称为 3500/22m 瞬态数据接口 ()(系统 1 状态监测和诊断软件和 3500 系统配置软件)。 将 3500/20 机架接口模块(rim 功能)与 tdxnet 等通信处理器相结合,以收集数据。
在 3500 机架中, 位于电源旁边的插槽中。为了持续收集稳态和瞬态动态(波形)数据并通过以太网链路将该数据传输到主机软件,它与 m 系列监视器(3500/40m、3500/42m 等)进行交互。 具有传统的静态数据收集功能。然而, 还可以使用可选的通道启用盘来记录动态、高分辨率瞬态数据。
3500 机架包含 的通信处理功能。尽管执行一些由整个机架共享的任务,但它并不是监控系统的关键组成部分,并且与整个系统监控自主机械保护的效果无关。
它用于在“运行”和“编程”模式之间切换 3500 机架。run 模式可防止配置修改,同时允许机架正常运行。机架可以在本地或远程配置,同时仍然在编程模式下正常运行。
通过从任一位置的机架上拔下钥匙,开关可以保持在“运行”或“编程”位置。您可以通过将交换机锁定在“运行”位置来防止不必要的机架重新配置。每当需要远程重新配置机架时,开关都可以锁定在“编程”位置。
functional deion:
the 3500/22m is a transient data interface module manufactured and designed by bently nevada as part of the 3500 series for monitoring seismic activity.the 3500/22m transient data interface () is the interface between the 3500 monitoring system and compatible software (system 1 condition monitoring and diagnostics software and 3500 system configuration software).the combines the the combines the functionality of the 3500/20 rack interface module (rim) with the data collection capabilities of a communications processor such as tdxnet.
features:
in the 3500 rack, the is located in a slot next to the power supply. it interacts with m-series monitors (3500/40m, 3500/42m, etc.) in order to continuously collect steady-state and transient dynamic (waveform) data and transmit that data to the host software over an ethernet link.
the has traditional static data collection capabilities. however, the can also record dynamic, high-resolution transient data using an optional channel enable disk.
the 3500 rack contains the communications processing capabilities of the . although the performs some tasks that are shared by the entire rack, it is not a critical component of the monitoring system and is not related to the effectiveness of the overall system to monitor autonomous machinery protection.
the link between the 3500 monitoring system and compatible software is called the 3500/22m transient data interface () (system 1 condition monitoring and diagnostics software and 3500 system configuration software.) the combines the 3500/20 rack interface module (rim function) with a communications processor, such as tdxnet, to collect data.
in the 3500 rack, the is located in a slot next to the power supply. it interacts with m-series monitors (3500/40m, 3500/42m, etc.) in order to continuously collect steady-state and transient dynamic (waveform) data and transmit that data to the host software over an ethernet link.the has traditional static data collection capabilities. however, the can also record dynamic, high-resolution transient data using an optional channel enable disk.
the 3500 rack contains the communications processing capabilities of the . although the performs some tasks that are shared by the entire rack, it is not a critical component of the monitoring system and is not related to the effectiveness of the overall system to monitor autonomous mechanical protection.
it is used to switch the 3500 rack between run and program modes. the run mode prevents configuration changes while allowing the rack to operate normally. the rack can be configured locally or remotely. the rack can be configured locally or remotely while still operating in the programmed mode.
the switch can remain in the run or program position by removing the key from the rack in either position. you can prevent unnecessary rack reconfiguration by locking the switch in the run position. the switch can be locked in the program position whenever you need to reconfigure the rack remotely.
3500/
3500/15 106m1079-01
3500/
3500/20 125744-02
3500/22m 138607-01
3500/22m 288055-01
3500/25 125792-01
3500/25 149369-01
3500/32m 149986-02
3500/33 149986-01
3500/40m 140734-01
3500/40m 176449-01
3500/42m 176449-02
3500/44m 140734-03
3500/44m 176449-03
3500/45 176449-04
3500/50 133388-02
3500/53 133388-01
3500/60 163179-01
3500/62 163179-03
3500/65 145988-02
3500/92 136180-01
3500/93 135799-01
3500/64m 140734-05
3500/91 161204-01
贵州安顺市西秀区西秀区北街街道虹山湖路42号虹山大酒店(百灵.希尔顿逸林酒店 )幢14层9号
期待你的来电